This 13.5V/30A SMPS based Power Supply cum Battery Charger is for powering the wireless sets. It supplies power to the
Wireless Set and at the same time Charge the battery.
INPUT AC SPECIFICATIONS
Input Voltage 90V to 130VAC RMS & 170V TO 270VAC. (Selecting Change over switch) Input Frequency 50Hz ± 3Hz
OUTPUT DC SPECIFICATIONS
DC Output Voltage 13.50 V DC
Output Current – Equipment 30.0 Amps (When Battery drawing no current)
Output Current – Battery 10.0 Amps
Battery deep discharge
cut-off facility 10.60V ± 0.20V
PROTECTIONS
Output Over Voltage Power supply trips on over voltage condition.
Output Over Load end Output folds back on over load
Short Circuit Goes to hick-up mode on Short Circuit
Battery Reverse Buzzer beep sound & Red LED glowing
INDICATIONS
Mains On When AC is available (Green LED)
Battery ON When Battery is supplying power to the Radio (Amber LED)
Battery Low When Battery Voltage is less than <11.4V (RedLED)
ENVIRONMENTAL
Operating Temperature 0 – 50°C
MECHANICAL
Dimensions (W × H × D) 269 × 100 × 276(in mm)
Weight (in Kg.) 3.5
