POWER SUPPLY CHARGER TPS440CT-15

DESCRIPTION:

This 13.5V/15A SMPS based Power Supply with Battery Charger is for powering the wireless sets. It supplies power to the Wireless Set and at the same time Charge the battery.

SPECIFICATIONS:

INPUT AC SPECIFICATIONS :

Input Voltage 90V to 130VAC RMS & 170V TO 270VAC. (Selecting Change over switch)

Input Frequency 50Hz ± 3Hz

OUTPUT DC SPECIFICATIONS:

DC Output Voltage 13.50 V DC

Output Current – Equipment 15.0 Amps (When Battery drawing no current)

Output Current – Battery 7.0 Amps

Battery deep discharge cut-off facility 10.60V ± 0.20V

PROTECTIONS :

Output over Voltage: Power supply trips on over voltage condition.

Output over Load end Output: folds back on over load

Short Circuit: Goes to hick-up mode on Short Circuit

Battery Reverse: Buzzer beep sound & Red LED glowing

INDICATIONS:

Mains on: When AC is available (Green LED)

Battery ON: When Battery is supplying power to the Radio (Amber LED)

Battery Low: When Battery Voltage is less than <11,4V (Red LED)

ENVIRONMENTAL

Operating Temperature 0 – 50°C

MECHANICAL

Dimensions (W × H × D) 190 x 75 x 195(in mm) / 7.4” x 2.9” x 7.6” (inches)

Weight (in Kg.) 1,9 kg / 5 lb (pounds)

DOWNLOAD BROCHURES TPS 440CT-15 V1

POWER SUPPLY CHARGER TPS440CT-15